TOWER RIGIDAL is an angular trapezoidal-ribbed profile. The profile depth of 32mm gives it remarkable strength that suits its use in roofing and walling primarily in industrial applications.
TOWER RIGIDAL
GENERAL INFORMATION
Applications
Institutions, Roof Cladding, Side Cladding, Decking, False Ceiling, Poultry Farm Roofing.
TOWER RIGIDAL 5 is an angular trapezoidal-ribbed profile of five troughs six ribs and a cover width of 750mm. It can be crimped into curves of minimum 400mm radius to enhance its use and aesthetic properties.
TOWER RIGIDAL 6 is an angular trapezoidal-ribbed profile of six troughs seven ribs and a cover width of 900mm. It can be crimped into curves of minimum 400mm radius to enhance its use and aesthetic properties.
TOWER RIGIDAL 7 is an angular trapezoidal-ribbed profile of seven troughs eight ribs and a cover width of 1050mm. It can be crimped into curves of minimum 400mm radius to enhance its use and aesthetic properties.
CROSS SECTION
TECHNICAL SPECIFICATION
- 0.4mm to 1.4mm tolerance 10%
- Any length from 1.0m in steps of 0.5m to maximum of 12m
- Tower Rigidal 5 & 6: Tile Red, Sky Blue, Bright Blue, Dark Green, Brick Red, Light Cream and Kraft Grey.
- Tower Rigidal 7: Natural Aluminium
- Natural Aluminium – Other colours available on request (minimum 300m)
- Tower Rigidal 5: 805mm
- Tower Rigidal 6: 955mm
- Tower Rigidal 7: 1105mm
- Tower Rigidal 5: 0.750m
- Tower Rigidal 6: 0.900m
- Tower Rigidal 7: 1.05m